Convergence Rate of Solutions to a Hyperbolic Equation with $p(x)$-Laplacian Operator and Non-Autonomous Damping

This paper concerns the convergence rate of solutions to a hyperbolic equation with $p(x)$-Laplacian operator and non-autonomous damping. We apply the Faedo-Galerkin method to establish the existence of global solutions, and then use some ideas from the study of second order dynamical system to get the strong convergence relationship between the global solutions and the steady solution. Some differential inequality arguments and a new Lyapunov functional are proved to show the explicit convergence rate of the trajectories.     

长光程共振式二氧化碳气体光声传感器研究

二氧化碳(CO₂)是植物光合作用的原材料,也是一种温室气体,其过量地排放会影响动植物的生态环境。在碳达峰、碳中和的背景下,研制高灵敏度的CO₂检测装置具有重要意义。为了监测大气环境中CO₂含量的变化,设计了一种长光程共振式CO₂气体光声传感器,并以此搭建了光声检测装置。以中心波长为2 004 nm的分布式反馈激光器(DFB)作为激发光源,激光射入由漫反射材料制成的球型吸收腔,在腔内多次反射以增加气体的吸收路径。吸收腔外部被两个高热传导率的铝制半球包裹,降低由池体吸收光能后产生的热噪声。吸收腔上耦合一根声学管,当其工作在一阶纵向共振模态时,光声信号被放大,在管子末端达到极大值。为了进一步增大光声信号,通过饱和加湿样品的方式来加快CO₂气体的弛豫速率,加湿后的样品产生的光声信号是干燥样品的2.1倍左右。使用一系列浓度的湿润CO₂样品标定光声检测装置,结果表明,光声信号与浓度之间呈现良好的线性关系。在此基础上,通过对标准气体的检测实验,验证了装置的准确性与稳定性...     

Dynamics of milling processes with variable time delays

A milling-process model with a variable time delay associated with each cutting tooth is presented in this article. The source of this variable time delay is the feed rate. The effect of the feed motion on the entry cutting angle, the exit cutting angle, and the amplitude of feed mark is also discussed. Loss-of-contact effects are also considered. The system dynamics is described by a set of delay differential equations with periodic coefficients and variable time delays. A semi-discretization scheme is presented for analyzing the stability of periodic orbits of this system. The analysis provides evidence of period-doubling bifurcations and secondary Hopf bifurcations. Good agreement is found between the numerical results obtained from this work and the results of related experimental studies.     

Measurement of energy release rate and energy flux of rapidly bifurcating crack in Homalite 100 and Araldite B by high-speed holographic microscopy

High-speed holographic microscopy is applied to take three successive photographs of fast propagating cracks in Homalite 100 or in Araldite B at the moment of bifurcation. Crack speed at bifurcation is about 540 m/s on Homalite 100, and about 450 m/s on Araldite B. From the photographs, crack speeds immediately before and after bifurcation are obtained, and it is found that discontinuous change of crack speed does not exist at the moment of bifurcation in the case of Homalite 100, but exists in the case of Araldite B. From the photographs, crack opening displacement (COD) is also measured along the cracks as a function of distance r from the crack tips. The measurement results show that the CODs are proportional to √r before bifurcation. After bifurcation, the CODs of mother cracks are proportional to √r, though the CODs of branch cracks are not always proportional to √r. The energy release rate is obtained from the measured CODs, and it is found that energy release rate is continuous at bifurcation point in both cases of Homalite 100 and Araldite B. Energy flux that shows the energy flow toward a crack tip is also obtained.     

Energy release rates in a constrained epoxy disc with Hookean and Mooney–Rivlin materials

Assuming that the disc material can be modeled either as Mooney–Rivlin or as Hookean and the steel ring enclosing the disc as Hookean, the energy release rates as a function of the crack length are evaluated and compared. Two loadings are considered––one in which the surface of the star shape hole in the disc is loaded by a uniform pressure and the other in which the temperature of the composite body is uniformly raised. It is found that the linear and the nonlinear analyses give qualitatively similar results for the two loadings. For each load, the energy release rate increases with an increase in the starter crack length, reaches a maximum value and then decreases gradually.     

A DECAGONAL QUASICRYSTAL WITH AN ARC-SHAPED CRACK

A decagonal quasicrystal,which is weakened by an arc-shaped crack penetratingthrough the solid in the period direction,and which is subjected to remote uniform phonon stresses,is investigated by applying the complex variable method which is just developed by the authors.It is found that the phonon and phason stresses near the crack tips exhibit inverse square rootsingularities.The four complex stress functions characterizing the phonon and phason fields arederived.Explicit expressions for the phonon and phason stress intensity factors,crack openingdisplacements and energy release rate are also presented.     

Rheological properties of network models with configuration-dependent creation and loss rates

A numerical stochastic approach allows the exact solution of the convection equation arising in network theories. We now want to show the flexibility and the limits of this approach by studying the rheological properties of different kinds of models.     

Numerical Solution and Sensitivity Analysis of Pore Liquid Pressure and Cake Porosity to Model Parameters

Filter cake formation is important in groundwater and oil wells where drilling contains suspended mud particles. The accumulation of these mud particles on the borehole wall creates a pressure drop in the well. Furthermore, the migration of colloidal particles into adjacent porous rock could damage the formation and cause productivity decline. In this study, numerical solutions for pore liquid pressure variation across the cake with variable total stress and associated porosity variation are obtained. Mass equations for captured and suspended particles are averaged along the mud cake thickness, taking into account conditions on the cake surface and at the filter septum. The variability of total stress in soil consolidations problem is considered to determine the pore liquid pressure along the mud cake thickness. Then, the relation between porosity and pressure is studied to determine the mud cake porosity. Experimental data obtained by various researchers is used to compare and test the validity of numerical solutions to develop guidelines for model applications. Results show that the pore liquid pressure increases with the decrease of membrane impedance value (i.e. less pervious membrane). Also, the pressure profile has a cubic function of dimensionless cake thickness. The conclusions from the sensitivity analysis conducted in this study agree with earlier conclusions.     

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES(Ⅸ)—THERMOMECHANICS

The existing fundamental laws of thermodynamics for micropolar continuum field theories are restudied and their incompleteness is pointed out. New first and second fundamental laws for thermostatics and thermodynamics for micropolar continua are postulated. From them all equilibrium equations and the entropy inequality of thermostatics as well as all balance equations and the entropy rate inequalities are naturally and simultaneously deduced. The comparisons between the new results presented here and the corresponding results demonstrated in existing monographs and textbooks concerning micropolar continuum mechanics are made at any time. It should be emphasized to note that, the problem of why the local balance equation of energy and the local entropy inequality could not be obtained from the existing fundamental laws of thermodynamics for micropolar continua, is believed to be clarified.     

The effects of shear on delamination in layered materials

The effect of transverse shear on delamination in layered, isotropic, linear-elastic materials has been determined. In contrast to the effects of an axial load or a bending moment on the energy-release rate for delamination, the effects of shear depend on the details of the deformation in the crack-tip region. It therefore does not appear to be possible to deduce rigorous expressions for the shear component of the energy-release rate based on steady-state energy arguments or on any type of modified beam theory. The expressions for the shear component of the energy-release rate presented in this work have been obtained using finite-element approaches. By combining these results with earlier expressions for the bending-moment and axial-force components of the energy-release rates, the framework for analyzing delamination in this type of geometry has been extended to the completely general case of any arbitrary loading. The relationship between the effects of shear and other fracture phenomena such as crack-tip rotations, elastic foundations and cohesive zones are discussed in the final sections of this paper.